0 2106 8259

Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)(โทรจองผ่านแอดมินเท่านั้น)
Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)

WAH201903003

13,723.00

14,445.00 -5%

*ราคาอาจมีการเปลี่ยนแปลง

โปรโมชั่น: ส่วนลด 5% ถึง 31 ธันวาคม 2563

กรุณาเลือกวันที่เข้าร่วมหลักสูตร

วัน เวลา จำนวนที่ว่าง

Stock No: -

- จำนวนที่นั่งว่าง -

Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)(โทรจองผ่านแอดมินเท่านั้น)
Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)

13,723.00.-
14,445.00 -5%

*ราคาอาจมีการเปลี่ยนแปลง

รายละเอียดสินค้า

Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)(โทรจองผ่านแอดมินเท่านั้น) จองผ่านแอดมินเท่านั้น หากสั่งซื้อเข้ามา คำสั่งซื้อจะถูกยกเลิก

Training Course Outline

 

Course Name: Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)

Training Duration: 1 Day (Including Theory & Practical Training)

Training Time: 08:30 – 16:30

Class Size: Minimum 6 Persons / Maximum 12 Persons.

Registration Fee: 13,500.00 Baht / Person.

Certification: Certificate to be issued by 3M Safety Training Center Thailand.

Certification Validity Period: Statement of Attainment valid for 2 years from date of issue.

Training Location: 3M Safety Training Center Thailand /or Onsite.

 

Overview:

This course has been designed to meet or exceed the minimum standard for Working at Height Training for Supervisor/Inspector/Installer Level (Competent Person/Competent Inspector and Competent Installer), as stipulated by ANSI Z359.2 and OSHA 1926.503.

This course is aimed at refreshing students in the theoretical knowledge and practical skills required to competently, safely work at height, supervise work at height, safely inspect and install key fall protection products.

This course has been contextualized to address working activities, hazards and fall protection equipment used in Industry.

 

Target Audience:

Any and all personnel at a Supervisor Level or above, who’s work activities include working at height, supervising work at height, inspecting and installing fall protection equipment and who wish to refresher their 3M Certificate.

 

Student Prerequisites:

Students should be physically fit and able to participate in moderately strenuous practical activities.

Students shall be following Drug / Alcohol Policy.

Students don’t were any short trouser and sandal to Training Center.

Student shall prepare and were Safety Boots for Training.

 

Document Prerequisite for Training:

  • Medical Checkup Document.
  • Copy of ID. Card /or Passport.
  • Existing Training Certificate will be /or was expired.

 

Learning Objectives:

On completion, students will be able to demonstrate competence in the theory and practice of the following:

  • Review and identify legislative requirements for working at height and fall protection.
  • Review and identify roles and responsibilities for working at height and fall protection.
  • Review and identify hazards, control measures to mitigate risk and undertake risk assessment while working at height.
  • Review and develop procedures for the use of fall protection systems.
  • Review and apply best practices for prevention of dropped objects.
  • Review and apply best practices for the selection, use and maintenance of access systems.
  • Review and apply best practices for the selection, use and maintenance of fall prevention systems.
  • Review and apply best practices for the selection, use, maintenance and evaluate of fall arrest systems.
  • Review and apply conditions and limitations of fall arrest equipment standards.
  • Review and apply best practices for the selection, use and maintenance of anchorage, body support, connectors, descent systems, emergency and rescue systems.
  • Demonstrate pre-use inspection and fitting of a personal fall arrest system.
  • Demonstrate basic horizontal and vertical movement using personal fall arrest system.
  • Demonstrate advanced horizontal and vertical movement using fall arrest systems.
  • Demonstrate work positioning using fall arrest systems.
  • Demonstrate reacting to a fall emergency (as the casualty).
  • Demonstrate responding to a fall emergency (as the first person on the scene).
  • Demonstrate basic post rescue casualty management.
  • Demonstrate automatic descent evacuation.

 

  • Review and identify legislative requirements for fall protection equipment inspection.
  • Review the differentiate between pre-use inspection and competent inspection.
  • Review the define criteria for the scheduling of fall protection equipment inspection.
  • Review the define criteria for post inspection actions.
  • Review the define criteria for fall protection equipment storage and preventative maintenance.
  • Demonstrate inspection of synthetic anchorage connectors.
  • Demonstrate inspection of steel anchorage connectors.
  • Demonstrate inspection of full body harness.
  • Demonstrate inspection of shock absorbing lanyard.
  • Demonstrate inspection of self-retracting lifeline (SRL).
  • Demonstrate inspection of an escape device.
  • Demonstrate inspection and installation of a horizontal lifeline system.
  • Demonstrate inspection and installation of a vertical lifeline system.
  • Record fall protection equipment inspection results. 

Note: This cost is included as the following items below, when conduct training at 3M Safety Training Center Thailand:

 

  • Basic Personal Protective Equipment (PPE) will be supported during Practical Training such as Safety Helmet, Safety Glasses, Coverall and Gloves.
  • Meal Provided with Lunch and 2 Coffee breaks per Day.

 

 

 

 

คะแนนรีวิว Working at Height for Supervisor/Inspector/Installer-Refresher (WAH-SII-R)(โทรจองผ่านแอดมินเท่านั้น)

0จาก 5

จาก 0 รีวิว

5 ดาว
0
4 ดาว
0
3 ดาว
0
2 ดาว
0
1 ดาว
0

รีวิวสินค้า

หากคุณมีข้อสงสัย ติดต่อผู้เชี่ยวชาญได้ที่นี่

จัดส่งทั่วประเทศ ส่งฟรี
เมื่อช้อปครบ 250 บาท

เก็บเงินปลายทาง
มั่นใจ ได้ของชัวร์

© 2024 3M. All Rights Reserved.